The USB.OSCILL digital oscilloscope is designed for studying electrical signals in the 0...15 MHz band.
Data management and display are carried out:
-
personal computer/laptop/netbook/tablet running Windows operating system via USB interface
-
a pocket computer running the Windows CE operating system, equipped with a USB-host port
-
phone/tablet running Android 4 or later, via OTG port
The oscilloscope is designed as a probe that fits comfortably in your hand with replaceable heads. On the back of the probe there is a connector through which data is exchanged and power is supplied.
Galvanic isolation is provided.
Attention! full technical specifications, updated software versions, reference materials on measurement methods, answers to frequently asked questions - all this is on the manufacturer’s website
OSCILL.COM .
Main characteristics:
-
CEP bandwidth: 15 MHz
-
ADC capacity: 8 bits
-
Sampling Rate: 32MSa/s
-
Sampling rate in stroboscopic mode: 800MSa/s
-
minimum sensitivity: 10 V/div
-
maximum sensitivity: 20 mV/div
-
maximum input voltage: 250 V
-
RAM size: 2104 bytes
-
PC communication interface: USB/UART
-
maximum connection speed with PC: 921 kbaud
-
galvanic isolation from PC: 2500 V
Execution
USB.OSCILL in the form of a probe provides significant advantages over the classic design (in the form of a separate unit between the passive probe and the computer):
-
no need for a purchased probe - lower overall cost of ownership
-
proximity of the input to the circuit under test: low input capacitance and absence of reflections while maintaining sensitivity
-
hand-friendly size and light weight
-
possibility of using heads for various purposes and characteristics
-
Fewer connectors improve oscilloscope reliability
-
light weight and size, ideal for moving
Main functions:
- auto/standby/manual/delayed sweep;
- arbitrary ratio of pre- and post-samples;
- hardware offset up to three screens;
- analog filters 3 kHz and 3 MHz;
- 15-position hardware attenuator;
- closed/open entrance;
- arbitrary synchronization level,/, \ and /+\
- stretching the oscillogram vertically and horizontally;
- statistical mode (DPO) color/brightness;
- strobe (RIS, equivalent sweep);
- interpolation (4 types, including sin(x)/x );
- averaging up to 256 times;
- peak detector mode (2 options);
- high resolution mode (up to 14 bits);
- flexible quality/speed balance settings;
- measurements of constant and average voltage values;
- AC voltmeter: RMS (True RMS) and dB;
- peak voltmeter: min, max, peak-peak;
- measurements of lower, upper levels, amplitude;
- measurement of period, frequency, duration, duty cycle;
- measurements of rise/fall time, emissions;
- spectrum analyzer, SOI meter, selective voltmeter;
- signal histograms (statistical analysis);
- screen measurements, selecting an area for measurements;
- saving static and dynamic oscillograms;
- export of data in various formats, incl. continuous;
- recorder - long-term recording of oscillograms.
All switches are made by electronic keys and are software controlled; there are no mechanical (contact) switches.
Universality of application and expansion of ranges are provided by interchangeable heads and probes.
Accessories included:
replaceable head (needle)
USB cable
disk with software
verification protocol
storage case
TECHNICAL CHARACTERISTICS
One-time digitization methods:
- normal: one sample - one ADC sample per sampling interval
- averaging: one sample - the average of the maximum number of ADC samples per sampling interval
- high resolution: one sample - the sum of ADC samples per sampling interval, reduced to 16 bits
- peak double: the sample consists of the minimum and maximum values for the sampling interval
- peak alternating: alternating minimum and maximum values for the previous two sampling intervals
Number of passes: 2,4,8,16,32,64,128,256.
- averaging: sample - the average of the corresponding samples of each pass;
- high resolution: sample - the sum of the corresponding samples of each pass, reduced to 16 bits;
- peak double: the sample consists of the minimum and maximum values of the corresponding samples of each pass;
- peak alternating: alternating the minimum and maximum values of the corresponding samples of each pass.
Login options:
- input resistance, kOhm: 1000±6
- input capacitance, pF (20...200 mV/division): 15±5
- input capacitance, pF (0.5...10 V/division): 25±5
- maximum value of the measured voltage (at 10V/div), V: ±120
- maximum input voltage with closed input (0.5...10 V/div), V: ±150
- maximum input voltage with the input closed (20...200 mV/div), V: ±6
- maximum permissible long-term voltage at the input, V: ±250
* the maximum measured and maximum permissible voltages can be significantly increased by using divider heads (supplied upon request).
Manufacturer's warranty - 6 months.
![Oscilloscope attachment USB.OSCILL [1 channel, 15 MHz]](/files/pic/izmerit/013950-s.jpg)
![Oscilloscope attachment USB.OSCILL [1 channel, 15 MHz]](/files/pic/izmerit/013950.jpg)
![Oscilloscope attachment USB.OSCILL [1 channel, 15 MHz]](/files/pic/izmerit/013950-1.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
