The multimeter allows you to measure the following parameters:
-
direct and alternating current (up to 10 A)
-
DC and AC voltage
-
resistance
-
capacitor capacity
-
frequency
-
temperature
-
duty cycle measurement
-
power measurement
Also available:
-
audible chain ringing,
-
pn junction testing (diode test),
-
testing of transistors.
-
relative measurement mode REL
-
4-20 mA current loop
-
Fuse in the circuit 10 A
-
Simultaneous current and voltage measurements
-
Peak value indication
-
Maximum/minimum mode
Convenience in work will be provided by the following functions:
-
auto range detection
-
current measurement mode warning
-
presets
-
auto-tuning
-
true rms reading
-
screen backlight
-
full screen mode
-
analog strip on display
-
automatic power off in the absence of measurements ("sleep mode");
-
DATA HOLD mode;
-
data logging
-
memorization of values
-
optically isolated RS232C interface for communication with a computer;
-
overload indication;
-
low battery indication (7.5 V);.
-
a cover made of elastic plastic around the perimeter of the device protects it from mechanical damage.
Display:LCD, size 73 x 50 mm. maximum bit depth - 40,000;
Constant voltage (DC), V: 400mV/4V/40V/400V/1000V: ±(0.025%+5)
Input impedance of DC voltmeter at 200 mV limit: 2.5 GΩ;
Input impedance at other limits:10 MOhm
Alternating voltage (AC), V:4V/40V/400V/1000V: ±(0.4%+30)
Measured AC voltage frequency: 100 kHz.
Direct current (DC), A:400μA/4000μA/40mA/400mA/10A: ±(0.08% +8)
Alternating current (AC), A:400μA/4000μA/40mA/400mA/10A: ±(0.5% +15)
Resistance, Ohm:400 ohms/4 k ohms/40 k ohms/400 k ohms/4M ohms/40 M ohms: ±(0.3%+8)
Capacity, F:40 nF/400 nF/4μF/40μF/400μF/4μF/40μF: ±(1%+20)
frequency Hz: 40Hz/400Hz/4kHz/40kHz/400kHz/4MHz/40MHz/400MHz ±(0.01%+8)
Temperature, °C : -40°C ~ 1000°C ± (1%+30)
Temperature, ° F: -40°F ~ 1832°F ±(1.5%+50)
Relative duty cycle:10% – 90,0%
Sampling rate:2-3 times/second
Food:9V battery "Krona"
Dimensions:200 x 93 x 40 mm.
Weight:384 grams.
Accessories included:test leads, battery, manual, crocodile clips, test clips, temperature sensor, power supply, USB cable, software, carrying bag.