FAST cure eco-friendly epoxy superglue
Start cure ("pot life") 3-5 minutes after mixing the components.
Cure in 3 hours (at room temperature) , full strength is gained in 24 hours.
A wide range of bonded materials: metal, ferrite alloys, ceramics, concrete, glass, plastic (except greasy), wood, composite materials.
For indoor and outdoor use, at temperatures down to -20°C.
Characteristics:
classification
|
epoxy adhesive
|
visual characteristics
|
component A: transparent liquid
component B: transparent liquid
|
density (25°С, g/cm 3)
|
A:1.05±0.05 B:1.00±0.05
|
Viscosity (25°C,cps)
|
A:10000~20000 B:10000~20000
|
Mix Ratio
|
A:B= 1:1
|
Shore Hardness
|
≥50
|
Full Cure Time
|
at 25°C/24 hours
|
setting time (at 25°C)
|
3 ~ 5 minutes
|
shear strength
|
|
|
|
weight
|
20 grams
|
Recommendations for use:
To start polymerization, mix components A and B of the adhesive in a 1: 1 ratio, stir evenly.
Apply the mixture to the surfaces to be bonded, then press the surfaces together.
Surfaces must be pre-cleaned and degreased, if necessary sanded to roughen
Suitable for bonding with a maximum mounting gap of 0.5-1 mm.
Not recommended for gluing greasy plastics, i.e. polyolefins (PP, PE, teflon, silicone rubber, etc.)
Packing: 2 tubes in a blister, plastic spatula for mixing and glue application.