Logic analyzer Saleae Logic

Product picture

Product description format_size zoom_out zoom_in

• Input voltage range: -0.5V to 5.25
• Low level input voltage: -0.5V to 0.8V
• High level input voltage: 2.0V to 5.25V.
• Works with 5V, 3.3V, 2.5V, 2.0V systems.May work with 1.8V, but not recommended.
• ESD protection according to CE requirements
• Overvoltage protection up to +/- 15V.Not intended for continuous operation outside the range of -0.5V to 5.25.
• Input impedance: 1Mohm | | 10pF (typical, approximate)
• Clock frequency: +/- 20ppm, 24MHz
• Error/Accuracy: Pulse Width Measurement: +/- 42ns (at 24MHz).

• 24MHz. 16 MHz, 12 MHz, 8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 200 kHz, 100 kHz, 50 kHz, 25 kHz; Please note that high sampling rates require high speed USB to achieve, this cannot be achieved on all computers. Performance may improve by unplugging other USB devices, using a different USB host controller, or increasing the priority of the Saleae Logic software process.
• 10 Bl. measurements. The absolute speed depends on the data stream and the ability to compress it, as well as the available RAM and operating system. 10 Bl. measurements assumes a sufficiently high data compression.

• Windows XP (32-bit)
• Windows Vista (32-bit or 64-bit)
• Windows 7 (32-bit or 64-bit)
• Windows 8 (32-bit or 64-bit)
• Mac OS X 10.4 Tiger or higher
• Linux: latest Ubuntu, Fedora or OpenSUSE.Other distributions may work as well, but are not specifically supported.
• USB 2.0!!!