No adjustment is required for the outer diameter of the cable, a powerful spring presses the cable with a clip against the blade.
The depth of the cut of the insulation is adjusted so as not to damage the conductors. The adjusting screw is located at the end of the tool handle.
The blade is rotary - first, an annular cut is made, then the blade is turned and a longitudinal cut. If the removed section of insulation is short, then you can do only with an annular notch, without a longitudinal one.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown