Specialized lubricant for easy pulling of cables and wires through installation ducts and ducts.
Attached flexible and long tube - the extension easily attaches to the spray bottle and sprays onto the inside of the pull-through mounting elements.
KABELGLIDE does not dry out, does not stick together, is water repellent and is suitable for creating waterproof barriers.
The product retains its properties in a wide temperature range from -50°C to+200°C, is non-toxic and non-aggressive towards most materials.
Specifications:
appearance: transparent, colorless liquid
density at 25°С: 0.97 g/cm³
pour point: -50°С
heat resistance: -50°С -+200°С
vapor pressure (at 200°C): 1.33 * 10 -2 mbar
thermal conductivity: 0.16 W/K m
dielectric strength (at 20°С): 12kV/mm
viscosity at 25°С: 1000 m 2 /s
resistivity at 25°C: 1x10 15 Ω cm
dielectric constant at 25°С: 2.8 (0.5 - 100 kHz)
Purpose :
For easy routing of cables and wires through installation ducts and ducts.
Recommended use:
Insert the extension tube into the spray bottle of the aerosol can. Spray the product onto the surface of the cable.
Attention !
Do not use the agent on energized components. Allow volatile components of the product to evaporate before plugging in the device.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown