Anti-corrosion grease ANTIKORR Cramolin is designed for effective long-term protection of products made of ferrous and non-ferrous metals.
When applied, ANTIKORR aerosol forms a transparent film that displaces moisture, protects and cleans metal surfaces, penetrating pores, rust and dirt.
A protective lubricant can be applied to painted surfaces, most rubbers and plastics, as it does not contain CFCs and does not harm the materials.
Highly penetrating grease, similar to the popular WD-40 composition, however, it has higher lubricating properties.
Odor: specific, moderate
Specific gravity at 20°C: 0.80 g/cm³
Boiling range of solvents: 180 - 210°С
Heat resistance: -40 - 150°С
Viscosity at 20°C: 3cP
Viscosity at 40°C (oil): 32 cP
Dielectric Strength (ASTM D 877): 31500V
Film thickness: 1 - 2 microns
Coverage area: 100 - 150 m2/l
Corrosion resistance: over 9 months indoors
anti-corrosion protection of various products made of any metals during production, operation and storage
loosening and lubrication of rusted parts, spare parts, stuck nuts, bolts, etc.
processing of machine parts, welding seams, aluminum blanks, casting molds, parts that heat up during operation
storage processing of solder wire in coils, ball bearings, gears and much more.
Recommendations for use:
Spray on. Use an extension tube for hard-to-reach areas.
Can be used on both dry and damp surfaces. Due to its high penetrating power, the agent also works in hard-to-reach places.
To ensure uniform lubrication and corrosion protection, repeat the procedure periodically.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав