Standalone liquefied gas soldering iron with a power of 50-80 watts.
The ergonomic body of the soldering iron fits comfortably in your hand.
Lightweight, compact.
A gas soldering iron is indispensable for installation work at facilities where there is no power supply, or it is inconvenient to work with a soldering iron with a cord (installation of alarm and video surveillance, car service, installation and repair of illuminated advertising, etc.).
The tip temperature is regulated by limiting the gas supply.
The gas supply valve (switch) and the regulator are made separate. Plastic gas tank, round, ergonomic. Transparent bottom of the tank to control gas residues.
The tip has a combustion chamber with a mesh catalyst.
For open flame operation, the sting with the combustion chamber is removed, the nozzle opens. The soldering iron turns into a small-sized gas torch for shrinking the heat-shrinkable tube, brazing, etc. works.
Gas - liquefied butane. Filled through a standard filler neck from a can for gas lighters.
Without ignition devices.
ATTENTION!
To ignite the burner in the "soldering iron with a tip" mode, grasp the plastic compression nut of the combustion chamber with your fingers and pull it forward as far as it will go (it is spring-loaded). This will open 4 holes. With the valve open, put a fire on the holes, the gas will ignite inside the combustion chamber. Then release the clamping nut. Combustion will continue inside the combustion chamber without an open flame, in catalytic form.
For open flame operation, in "burner" mode, open the clamping nut and remove the combustion chamber. The nozzle remains open.
Functions:
-
burner mode (open flame operation possible)
-
separate power regulator and switching valve
Characteristics:
-
maximum power: 80 W
-
operating temperature in flash mode: 200°C-450°C
-
operating temperature in burner mode: 1300°C
-
gas container: 12 ml
-
operating time from one refueling: ≈20-50 min.
-
overall dimensions: 170mm (length) × 32mm (wide body part)
-
weight: 70 g
Completeness:
-
soldering iron - torch - 1 piece
-
combustion chamber with a cone-shaped sting - 1 piece
-
replaceable wedge-shaped sting for work on wax, plastic - 1 piece
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
