For drilling and milling work, it is necessary to fix the workpiece and move it in two planes.
Ideally, this is a coordinate table, or at least a cross vise.
The vise jaws are removable, fastened with two bolts. No notches, with a smooth surface. Dimensions 100 x 30 mm.
The base has fastening lugs on three sides.
Limbs are installed on the lead screws at the handwheel handles to control the movement.
Features:
jaw width: 100 mm
jaw stroke: 85 mm
height from the plane of the base: 130 mm
base length: 240 mm
base width: 120 mm
X-axis travel: 160 mm
Y-axis travel: 120 mm
weight: 7.7 kg
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown