Miniature drill for light drilling and polishing work.
In fact, it is a set consisting of a low-power high-speed electric motor and a chuck with a set of collets.
There is no drill body; if necessary, you can make your own from a plastic tube.
Power supply unit not included!
Supply voltage from 9V to 12V (using a regulated power supply, you can vary the engine speed).
Collet chuck with 6 collets.
The minimum diameter of the installed drill is 0.5mm, the maximum is 3.0mm.
Features :
supply voltage: 9-12 V DC
current (max): 0.15 A
speed (max): 5000 rpm
motor shaft diameter: 2.3 mm
motor case diameter: 28.6 mm
Collets: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
Completeness :
electric motor - 1 piece
cartridge: 1 piece
hex key for chuck fixing: 1 pc
collet: 6 pcs
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown