Aluminum tape is a foil tape with an adhesive layer on one side. The adhesive layer is covered with release paper, which must be removed when applying.
Aluminum tape reflects thermal IR radiation well.
Due to its high reflectivity, aluminum foil is widely used in electronic equipment repair during soldering to protect components, plastic parts and connectors from overheating and melting.
Adhesive-backed aluminum foil is also used in construction and installation work, repair of plumbing systems, refrigeration equipment and air conditioners.
The tape is used for installing air ducts, stoves, baths and saunas.
Aluminum tape properties:
reliable bonding and tight sealing of joints of foil-faced materials;
high tensile strength, low elongation;
wear resistance and durability;
heat resistance;
heat-reflecting properties (reflection of thermal infrared radiation);
tightness;
moisture resistance;
frost resistance down to -30°C.
Technical specifications:
roll length: 50 m
tape width: 40mm
tape thickness: 0.05mm
operating temperature range:-30°C…+120°C
breaking load: 30 N/cm
adhesive layer adhesion: over 500 N/m
surface thermal reflectance: 90 %
surface optical reflectance: 97%
water vapor permeability coefficient: 0.001 mg/m*h*Pa
Attention! Before applying, the surface must be dried and dust-free.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown