Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
It's easy to save energy and turn off the light automatically regardless of the light source! It is enough to connect the sensor junction box in series with the lamp according to the diagram on it (LOAD and L terminals) and the motion sensor mounted in the right place will turn on the lamp automatically when a person approaches. The control output is relay. The sensor has a snap-on cover.
The sensor reacts to movement in the area of its action. The coverage area is a cone with an angle of 120 degrees and a height (length) of up to 8 meters. The sensor's response area is determined by its design. A motion sensor with a Fresnel lens is used to receive the reflected infrared rays. When a signal is received about movement in the area of the sensor, the lighting turns on for 20-40 seconds and turns off if there is no movement in the area of the sensor. In the event that movement in the area of the sensor occurs constantly, the lighting will turn off only after the disappearance of movement in the area.
A photo relay is built into the sensor housing, which turns off the sensor during daylight hours to save energy. The illumination level for turning on the sensor in the area of its action is 5 Lux, that is, only at dusk or at night, or in dark rooms, the sensor will react to movement and turn on the lighting.
For even greater savings, we recommend using only LED lamps that have the best radiated/consumed power ratio. This adapter can be used to connect LED lamps with power consumption up to 120W, and incandescent lamps up to 200W.
Maximum load power: 200 W for incandescent lamps; 120W for LED and fluorescent lamps
Sensor sensing distance: 3-8m
Illumination level for sensor operation:> 5 Lux
Directional angle of the sensor: 120 °
Lighting duration: 20-40s
Sensor body and cover color: white
Sensor dimensions (L x W x D): 86 x 86 x 30 mm
Mounting holes diameter: 4mm
Maximum wire diameter for connection: 3 mm
Kit weight: 72g
Connection diagram:
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
