З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Done Deal DD6719 is an RTV silicone compound. Increased water resistance.
It is used for the repair of components and assemblies subject to long-term CIP operation and operating at elevated temperatures.
Specifications:
composition - methyl tri (MEK oximo) silane, vinyl tri (MEK oximo) silane, functional additives
color - gray
heat resistance - from -73°С to +315°С
setting time - 20 minutes
curing time - 10-12 hours
full polymerization - 24h
Scope:
Applied for installation:
installation of covers for the gas distribution mechanism, water pump, thermostat housing, cooling system pipes
sealing and insulation of electrical equipment, solder joints
repair of the surface of organosilicon rubbers during the repair of hot air paths
effectively replaces most standard (cut) gaskets
Features and Benefits
DD6719 is safe for vehicles equipped with an oxygen sensor (after full cure of the sealant)
resistant to temperature extremes and vibration
additional application to standard gaskets improves their heat resistance
resistant to automotive fluids (prolonged contact with gasoline is not recommended)
does not lead to corrosion of parts made of steel, cast iron or aluminum alloys
Application :
When replacing or refurbishing gaskets, clean and dry all surfaces to be treated.
Remove the cap of the tube and pierce the membrane, screw on the extension and cut off its top according to the required section.
Apply a continuous, uniform (3mm) layer of sealant around the perimeter of one of the surfaces to be joined.
Allow 20 minutes to set and bond the surfaces.
The sealant cures completely after 24 hours.
The curing time depends on the ambient temperature.
Use a knife to remove excess silicone from the treated surface.
Attention! DD6719 - If swallowed, do not induce vomiting, seek medical attention immediately. In case of contact with skin, clean with a dry cloth or cloth and wash with soap and water. In case of contact with eyes: rinse with water for 15 minutes. Keep out of the reach of children!
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
