A solenoid valve — is an electromechanical device for controlling the flow of all types of liquids and gases. It consists of a body and a solenoid (electromagnet) with a plunger carrying a disc or piston that controls the flow. When voltage is applied to the valve coil, the magnetic plunger is pulled into the solenoid, opening or closing the valve. Solenoid valves are used both in complex industrial processes and at home. They allow remote delivery of the required volume of liquid, steam or gas at the right moment (water supply in irrigation systems, heating control, boiler rooms, dosing and mixing systems, and water drainage).
Specifications:
Control type: normally open (closed when powered, opens when power is off)
Housing material: brass
Solenoid coil material: copper
Seal material: NBR nitrile rubber
Connection type: threaded
Working medium: water, gas, oil
Pressure range: 0-0.8 MPa, 0-8 atm
Working medium temperature: -10 ℃ +80 ℃
Nominal bore: 20 mm
Current consumption: 2.12 A
Supply voltage: 12VDC
Installation method:
It is recommended to install the valve with the coil on top. The valve body is marked with the water flow direction. If installed backwards, it will not work properly and water will flow in the opposite direction.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown