A miniature series of power modules rated at 2 W is a series of compact high-efficiency power modules designed Hi-Link Electronics. Input voltage 90 ~ 265V AC. (24.0V/83mA)
The miniature 2 W power module series is a range of compact high-efficiency power modules designed Hi-Link Electronics. The modules have a universal input voltage range (you can power your devices from any mains grid on the planet), low heat dissipation, low power consumption, high efficiency, high reliability and high isolation safety... Widely used in smart homes, automation systems, communication equipment, instrument making and other industries.
Input voltage 90 ~ 245 AC or 70-350 DC. No-load loss <0.1 W, low ripple, low noise, output short-circuit and overcurrent protection with self-recovery, isolation input - output 3000V AC, continuous operation time exceeds 100 000 hours; Comply with UL, CE; the product design meets EMC and safety test requirements. High-quality eco-friendly waterproof plastic potting is used. In terms of moisture protection, vibration, water and dust ingress it complies with IP65.
Input characteristics
Parameter Name
Parameter Value and Specifications
Unit
Notes
Rated input voltage
90-245
Vac
Input voltage range
85-264
Vac
Or 70-350Vdc
The maximum input current
≤0.2
A
Input inrush current
≤10
A
The maximum input voltage
≤270
Vac
Input soft start
≤50
mS
Input low voltage efficiency
Vin=110Vac,output full load≥69
%
Input high voltage efficiency
Vin=220Vac,output full load≥70
%
Long-term reliability
MTBF≥100.000
h
External fuse recommended
0.5A/250Vac
slow blow
Output characteristics (24.0V/83mA)
Parameter Name
Parameter Value and Specifications
Unit
Notes
No-load rated output voltage
24.0±0.1
Vdc
Full load rated output voltage
24.0±0.2
Vdc
Short time maximum output current
≥93
mA
Long time maximum output current
≥83
mA
Voltage regulation
±0.2
%
Load regulation
±0.5
%
Output ripple and noise
(mVp-p)
≤70
Rated input voltage, output full load. With 20MHz bandwidth oscilloscope, Load side 10uF and 0.1uF capacitance test.
mV
Switch overshoot amplitude
(Rated input voltage, output plus 10% load) ≤5
%Vo
Output over-current protection
Output the maximum load of 110-150%
A
Output short circuit protection
Direct output when the normal short-circuit, short circuit removed automatically resume normal work
Undamaged machine
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown