Pay Ultrasonic Bath Generator KMD-M4 400W 40KHz DIY Kit

Изображение товара

Product description format_size zoom_out zoom_in

DIY ultrasonic cleaner DIY kit. The kit contains the generator itself (driver), a control panel with a sticker and a temperature sensor.
The generator board has the ability to control not only the power of the ultrasonic bath and the cleaning time, but also control an external 220V AC heater for the bath, a temperature sensor is included in the kit.
The control panel has a display of seven-segment indicators, and tact buttons for controlling parameters and on/off the heater and ultrasound.

Main characteristics:

• Ultrasonic generator power: 400W
• Ultrasonic generator frequency: 40kHz
• Max. heater power: 1000W
• Dimensions of the ultrasonic generator board:  mm
• Center distance of the generator mounting holes: mm
• Alternator mounting holes diameter: 3mm
• Control panel dimensions: 120x70x12 mm

Precautions:

• Do not run the ultrasonic cleaner without cleaning liquid inside. Failure of the ultrasonic element is possible.
• While the bath is in operation, do not touch the body of the bath. Possibly high voltage injury.
• Do not dip your hands into the washing liquid while the bath is in operation.

Connection:

• AC220V - connection to the 220V network. L - phase, N - neutral.
• OUTPUT- connection to the ultrasonic emitter. Contacts "+" and "-" are conditional for correct phasing of several emitters. The output is galvanically isolated.
• HEAT- heater connection. L - phase, N - neutral. Relay control.
• TO DSIP- connection of the control board via a five-pin cable.
• NTC - sensor connection.

Control Panel:

• ON/OFFleft - on/off. heater
• ON/OFFon the right - on/off. Ultrasonic generator
• P- P+- changing the power level
• T+ T-- changing the operating time of the bath
• °С+°С-- change in fluid temperature