The rotary stand module allows any tool to be fixed at a set angle, significantly expanding the range of milling operations.
Also, thanks to the mounting holes, any vise can be securely fixed on its cast-iron base, which measures 150 by 150 mm. The base itself can also be fixed to a surface via four mounting holes.
The tube column, 25 mm in diameter, has a wall thickness of 1.6 mm and a height of 40 cm; it is fixed to the base with two screws, which allows the angle to be set at 90 degrees quite accurately.
The stand's «head» can be fixed at any height, and the plastic stop will not let it drop below the level you set. The maximum drilling depth is 60 mm.
The stand is very easy to use and will be a reliable helper when drilling not only vertical holes, but of course it also lets you drill a hole at a specific angle of your choice.
It almost completely eliminates drill play, which significantly improves hole accuracy and minimizes error. In addition, working with such equipment saves a lot of time and effort, thanks to the gear mechanism and a sufficiently long lever.
And its adjustable drilling depth stop will come in handy for those who need to do repetitive work.