Attention! Discounted item.
Reason for discount - the power regulator malfunctions, the soldering iron overheats, the lower temperature limit is too high. Normal operation requires readjusting the triac regulator (component replacement and adjustment), or an external triac regulator can be used.
Soldering iron with a thyristor power regulator built into the handle.
There is no temperature sensor and, accordingly, no regulator feedback, so this regulator is not a thermostat. However, power adjustment allows controlling the tip temperature and avoiding overheating, thereby maintaining the required soldering temperature. Limiting power also helps extend heater and tip life by reducing burn-off of the protective chrome plating.
The main advantage of this soldering iron is that its heating element and tip design is compatible with the soldering irons used in the most popular soldering stations. These are 900M series tips, also known as HAKKO-type tips.
The wide availability of these soldering tips is an undeniable advantage. You can always buy a tip of the required shape, and for those who own a soldering station with an existing set of tips, this soldering iron is a good complement to the station for soldering work away from the workbench.
As with soldering stations, changing the soldering tip takes just seconds.
900M tips are chrome-plated, durable, with factory-tinned ends. Chrome-plated tips need no filing and last a long time if used properly.
Ergonomic handle provides comfort during work.
As shipped from the factory, the soldering iron is fitted with a conical tip with a 0.8 mm point diameter (i.e. a 0.8mm cone).
This tip has a low heat capacity and is not suitable for all types of work; it is recommended to choose a set of replacement tips based on the intended work.
Tips can be chosen in this catalog section.
The most universal is the chisel tip, with width
tip 1.6 mm.
Specifications:
-
supply voltage: 230V, 50Hz
-
power: 60 W
-
power regulator: yes
-
quick-change tips: yes
-
tip type: 900M
Contents:
-
soldering iron - 1 pc
-
set of 5 replacement tips - 1 pcs
Attention!
Due to the fast heat-up, it is not recommended to operate the soldering iron at the maximum heater temperature, i.e. with the voltage regulator knob in the extreme right position, especially with a low-mass (thin) tip installed. This prevents overheating of the soldering iron, ensuring high-quality soldering and long tip and heater life.
The warranty does not cover this discounted soldering iron, as the soldering iron requires rework.
All soldering irons undergo 100% pre-sale testing and are sold in working order.