Attention! Discounted item.
The reason for the markdown is the incorrect operation of the power regulator, the soldering iron overheats, the lower temperature limit is too high. For normal operation, the triac controller needs to be reconfigured (component replacement and tuning), or an external triac controller can be used.
Soldering iron with a thyristor power regulator built into the handle.
There is no temperature sensor, and, accordingly, there is no controller feedback, so this controller is not a thermostat. However, the ability to adjust the power allows you to control the temperature of the tip, to avoid overheating, thereby maintaining the required soldering temperature. Limiting the power also extends the life of the heater and tip, reducing the fading of the protective chrome coating.
The main advantage of the soldering iron is the compatibility of the design of the heating element and the tip (sting) with the design of soldering irons used in the most popular soldering stations. These are stings of the 900M series, or as they are also called differently - HAKKO stings.
It is the prevalence of these soldering tips that is an undeniable advantage. You can always purchase a tip of the required configuration, and for those who have a soldering station with an already formed set of tips, this soldering iron will be a good addition to the station when soldering away from the workplace.
Just like in soldering stations, the procedure for changing the soldering tip takes a matter of seconds.
Sting 900M - chrome-plated, durable, with a factory tinned tip. Chrome-plated tips do not require sharpening, and, subject to the rules of operation, have a long service life.
The ergonomic handle provides comfort in work.
Initially, in the factory configuration, a conical tip with a tip with a diameter of 0.8 mm (i.e. a cone of 0.8 mm) is installed on the soldering iron.
-
supply voltage: 230V, 50Hz
-
Capability: 60W
-
power regulator: yes
-
quick change tips: yes
-
tip type: 900M
Completeness:
-
soldering iron - 1 pc
-
set of 5 replacement tips - 1 pc
Attention!
Due to the high heating dynamics, it is not recommended to operate the soldering iron with the maximum heater temperature, i.e. in the extreme right position of the voltage regulator knob, especially with a small mass (thin) sting installed. This will avoid overheating of the soldering iron, thereby ensuring high-quality soldering, a long service life of the tip and heater.
Warranty obligations for this discounted soldering iron do not apply, because. soldering iron needs to be improved.
All soldering irons undergo 100% pre-sale testing, they go on sale in working order.