Soldering iron adapter YIHUA-907D/F at Lukey station (thermistor)

Изображение товара

Product description format_size zoom_out zoom_in

Lukey soldering stations of all models are equipped with sockets for connecting a PS/2 soldering iron (if you look closely at the Lukey soldering iron connector, you can see a keyboard icon on the plastic). Most other manufacturers of soldering equipment, including YIHUA, use connectors that are more suitable for these purposes - microphone type, with a threaded lock with a union nut.
The soldering irons themselves are functionally interchangeable, the heaters have the same electrical parameters.
The problem of interchangeability lies only in the mismatch of the standard sizes of the connectors.
The adapter consists of a female microphone connector and a PS/2 male connector.

Features :

The adapter cable is designed to connect a soldering iron YIHUA-907D or YIHUA-907F instead of the original one - Spare soldering iron Lukey-907 with thermistor for 852D+/ 868/936+http: //voron.ua/catalog/lukey-852
For those station modifications, in which the soldering iron is equipped with a heater with a thermistor as a temperature sensor ( HAKKO 1321 heater ). br /> Lukey-852D+
Lukey-868
Lukey-853D
Lukey-936+
Lukey-936D

Adapter cable length - 150 mm.

For stations with a thermocouple, use another adapter as a soldering iron temperature sensor! This is due to the pinout of the soldering iron connector , the thermocouple requires correct pole polarity.


Attention! Before connecting a non-original soldering iron to the soldering station, make sure that the electrical parameters of the heater are correct. Type 907 soldering irons are produced with two fundamentally different types of heaters: ceramic with a thermistor as a sensor and nichrome (in a ceramic sheath) with a thermocouple. They are not interchangeable, when a soldering iron is connected with an unrelated heater, the soldering iron heats up uncontrollably, if not turned off for a few minutes, the heater burns out.