Isopropyl alcohol 99.9% IPA 100ml with sprayer HDPE container is isopropyl alcohol (isopropanol, IPA, CAS 67-63-0) for cleaning and degreasing in electronics, repair and production. It evaporates quickly, is non-conductive and leaves no marks on the surface.
Chystyi Strum ("Clean Current") is a Ukrainian brand of chemicals for electronics: isopropyl alcohol, KSF fluxes, I-20 oil and rosin. Formulations and packaging are chosen for electronics repair and production, not household cleaning.
isopropanol of 99.9% purity or higher: water no more than 0.1%, evaporation residue no more than 0.001%;
bottles and canisters made of high-density polyethylene (HDPE), which does not react with alcohol and keeps moisture out;
a QR code on the label links to a video guide and technical data;
packs from 50 ml to 10 l: with a cap, a sprayer or a spout — for any task.
Typical uses
removing flux and solder paste residues after soldering;
degreasing PCBs before soldering, conformal coating and potting;
cleaning contacts, connectors, memory slots and expansion cards;
removing old thermal paste from CPUs, GPUs and heatsinks;
cleaning stencils after solder paste printing;
cleaning lenses, optics, mirrors and glass from grease and fingerprints;
removing adhesive residue left by labels and tape.
Why 99.9% purity matters
Technical-grade isopropanol (92–95%) contains up to 8% water. After evaporation the water stays on the board: streaks and white residue appear, corrosion may develop under components, and coatings adhere poorly. Alcohol of 99.9% purity or higher (water no more than 0.1%) evaporates completely and leaves no dry residue.
Choosing the pack
Spray bottle — for treating boards and large surfaces: even application without waste.
At the workbench it is convenient to keep the alcohol in a dispenser bottle and wipe with lint-free wipes: cotton wool and paper tissues leave fibres.
How to use
Disconnect the device from power and remove the battery.
Apply the alcohol to the dirt or to a lint-free wipe or brush.
Remove the dirt; scrub flux from under components with a brush.
Let the alcohol evaporate completely (usually 1–5 minutes) before switching the device on.
Material compatibility
Safe for FR-4, metals, ceramics, glass and most plastics. Acrylic (PMMA), polycarbonate, polystyrene, some coatings and the oleophobic coating of screens may cloud or crack — test on an inconspicuous area first.
Safety
Highly flammable liquid (flash point about 12 °C): do not use near open flames, a hot soldering iron or sparks.
Vapours may cause drowsiness and dizziness — work in a ventilated area.
Irritating to eyes: in case of contact, rinse with plenty of water.
Keep out of reach of children.
Storage
In a tightly closed container, in a cool dry place, away from heat and flames. An open container absorbs moisture from the air, so close it right after use.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Владислав
unknown