The adhesive can bond various types of rubber, neoprene, natural rubber, ethylene propylene rubber (EPDM), styrene-butadiene-styrene (SBS) rubber . The adhesive is supplied in a 50 ml glass bottle. A brush for applying the adhesive is built into the cap. Gel-like consistency, light yellow color.
Directions for use:
1. Clean the surfaces of debris, dust and moisture. For a better result, smooth surfaces should be sanded with fine sandpaper.
2. The best bonding result is achieved at a temperature of 20-30°C.
3. Apply adhesive to both surfaces and let it dry for a few minutes until the surfaces become very tacky.
4. Press the bonded areas together with great force. The greater the force, the better the result.
5. Leave the bonded surfaces under pressure for 48 hours.