Magnifying lamp production
Intbright INBEST GROUP concern.
An excellent magnifying glass for cosmetology.
The lampshade is held on a pantograph with a closed balancer mechanism (the springs are located inside the pantograph arms).
The pantograph levers are metal, painted with damage-resistant enamel.
Thin plastic lens housing with ring LED backlight.
High-quality plastic, with a glossy surface, easy to clean from dirt.
The magnifying glass is closed with a hinged protective cover.
A magnification of 3 diopters (magnification factor x1.75) is the most optimal for comfortable work with hand tools (soldering iron, tweezers, screwdriver, etc.). At this magnification, the focal length is about300-330 mm allows you to work freely under the lens without touching it.
A large number of LEDs - 60 pieces - are evenly distributed around the circumference of the lampshade and provide good shadow-free illumination of the object in question. The luminous flux of the lamp is equivalent to the radiation of a 100-watt incandescent lamp.
The lamp switch is on the bottom plane of the lens body. This is a non-locking button that changes brightness in steps with each press.
A transparent plastic diffuser protects the lamp from accidental mechanical damage during operation and transportation.
Clamp bracket for securing the lamp to the edge of the table.
The maximum thickness of the tabletop on which the clamp can be installed is 60 mm.
Characteristics:
-
model: 9003LED-3D
-
lens diameter: Ø5" (Ø127 mm)
-
optical power of the lens: 3 diopters
-
supply voltage: 100-240 V, 50 Hz
-
power consumption: 14 W
-
Light source: 60 pcs SMD LED (0.2W/pc,High Luminous)
-
luminous flux: 1200 lm
-
Lamp color temperature: 5600-6000K
-
brightness adjustment: stepwise
-
lens material: glass
-
total length of pantograph: 820 mm
-
thickness of the table top for fastening the clamp (max): 60 mm
-
case and mechanism material: ABS plastic, polycarbonate, steel
-
black color
Attention!
Always close the lens cover after use!
The cover not only protects the lens itself from dust and damage.
The main purpose of the lid is to prevent fire.
After all, when you use a magnifying glass, you usually place it at the height of the focal length from the table surface. If the table is located close to the window, then the sun's rays focused by the lens can set objects on the table on fire (paper can easily catch fire even from a magnifying glass of a much smaller diameter).
Take this warning seriously, precedents have already happened to our clients!
The warranty period for this product is 3 months.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
