FM2112-CB is a protection IC for a single lithium iron phosphate (LiFePO4) cell with built-in high-accuracy voltage detection and delay circuits. It protects the cell against overcharge, overdischarge, charge and discharge overcurrent, and load short circuit. It drives two external N-MOSFETs (charge and discharge).
-CB version thresholds:
- overcharge detection voltage: 3.75 V ±25 mV;
- overcharge release voltage: 3.60 V ±50 mV;
- overdischarge detection voltage: 2.10 V ±50 mV;
- overdischarge release voltage: 2.30 V ±50 mV;
- discharge overcurrent detection voltage: 200 mV ±15 mV;
- charge overcurrent detection voltage: −200 mV ±30 mV;
- load short-circuit detection voltage: 0.85 V (typ.);
- 0 V battery charging: allowed.
Delays (set internally, no external capacitors needed), typ.: overcharge — 1200 ms, overdischarge — 140 ms, discharge overcurrent — 12 ms, charge overcurrent — 8 ms, short circuit — 400 µs.
Current consumption: operating mode — 3.0 µA typ., 6.0 µA max. (VDD = 3.2 V); sleep mode — 0.1 µA max.
Other: CS and OC pins withstand up to 20 V (absolute maximum rating); VDD–VSS operating voltage 1.5…8 V; operating temperature −40…+85 °C; power dissipation 250 mW; halogen-free.
Pinout: 1 — OD (discharge MOSFET gate), 2 — CS (current sense input, charger detection), 3 — OC (charge MOSFET gate), 4 — NC, 5 — VDD (power +), 6 — VSS (ground).
Applications: protection boards for single LiFePO4 cells. Typical circuit: R1 100…470 Ohm, R2 2 kOhm, C1 0.1 µF, two N-MOSFETs.