Car lock de-icer lets you open the lock even at very low temperatures (down to -40 °C). Quickly thaws mechanical parts, restoring their mobility and functionality. Contains an inhibitor that prevents corrosion. Leaves a film with a long-lasting lubricating effect on the surface. With regular use, prevents the lock from freezing again and condensation from forming. Safe for plastic, rubber and painted surfaces. Also recommended for de-icing cylinder locks and padlocks.
Directions for use:
1. Mix the contents of the can by shaking it for 1-2 minutes.
2. Insert the spray nozzle into the lock cylinder opening and press the bottom of the can for 2-3 seconds.
4. After 1-2 minutes, insert the key into the lock and try turning it.
5. Repeat the treatment if necessary.
Precautions:
Extremely flammable aerosol. Pressurized container: may burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Keep out of reach of children. Keep away from heat, sparks, open flames, hot surfaces. Do not spray on an open flame or other ignition sources. Do not pierce or burn after use. Protect from sunlight and store at temperatures not exceeding +50 °C. Composition: synthetic oil, organic solvent blend, propellant gas.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown