Hot stapler ZhongDi ZD-8905G for repairing plastic parts by joining the pieces of the part being repaired with wire staples.
The stapler heats staples, which melt into the plastic and hold the fragments of the plastic part together, forming a reinforced joint.
How to use this soldering iron: the staples are inserted into the soldering iron holders and heated, then the mounted staples are melted into the plastic. After that the staple is fixed (by a slight horizontal turn of the soldering iron). Then the staple cools down, and the protruding ends are trimmed with cutters.
The tool comes with a set of staples (4 types, 50 pcs each) and cutters. Staples: outside corner, inside corner, flat and wave.
Specifications:
supply voltage: 220-240 V
power: 60 W
heating temperature: 300°C
staple wire diameter: 0.8 mm
number of staples in the set: 200
Contents:
soldering iron - 1 pc
side cutters - 1 pc
staples: 4 x 50 pcs
storage case - 1 pc
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown