Soldering iron with PTC ceramic heater, no power control.
The main advantage of this soldering iron is that its heating element and tip design is compatible with the soldering irons used in the most popular soldering stations. These are 900M series tips, also known as HAKKO-type tips. You can always buy a tip of the needed shape, and for those who already have a soldering station with a set of tips, this iron is a good addition to the station for soldering away from the workbench.
As with soldering stations, changing the soldering tip takes just seconds.
900M tips are chrome-plated, durable, with factory-tinned ends. Chrome-plated tips need no filing and last a long time if used properly.
The ergonomic handle with a silicone sleeve makes work comfortable.
As shipped from the factory, the soldering iron is fitted with a conical tip with a 0.8 mm point diameter (i.e. a 0.8mm cone).
This tip has a low heat capacity and is not suitable for all types of work; it is recommended to choose a set of replacement tips based on the intended work.
The most universal is the chisel tip, with width
tip 1.6 mm.
For this soldering iron we recommend a stand
from soldering stations, it fits the design of this soldering iron perfectly.
Specifications:
-
supply voltage: 230V, 50Hz
-
power: 35 W (max)
-
power regulator: no
-
quick-change tips: yes
-
tip type: 900M
Contents:
-
soldering iron with tip installed - 1 pcs
-
Euro socket adapter - 1 pc (soldering iron with "Asia" standard plug)
Attention!
Due to the very fast heat-up, it is not recommended to operate the soldering iron at the maximum heater temperature. Use some kind of voltage regulator (e.g. a thyristor regulator); this will prevent the soldering iron from overheating, ensuring quality soldering and long tip and heater life.
All soldering irons undergo 100% pre-sale testing. The tip and heating element of the soldering iron are consumables and are not covered by the warranty.
Additional information:
P.T.C. thermistors — semiconductor resistors with a positive temperature coefficient, whose electrical resistance, and therefore power, depends on their surface temperature. That is, the higher the temperature of a P.T.C. thermistor, the lower the power consumption. Accordingly, a PTC heater is a self-regulating heater: its resistance (and hence its power) changes with temperature.
For this reason, measuring soldering iron power with a wattmeter, as some users try, is incorrect. A digital wattmeter is fairly slow and cannot capture the peak power of a cold heater because it heats up so fast.