ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
Query history
your search history is empty
Whole catalog ↠ Electromechanical and Housing Products ↠ Fans ↠ DC fans
Product code:
052325

Fan 120x120x25mm 24V SF12025B2L24-C (4 wires)

120x120x25 mm 24 VDC (18...26.8V) 0.27A 175.2 m3/h 3100 rpm 46.6 dBA ball bearing
Connection - 4 wires (FG sensor, PWM control)
Fan 120x120x25mm 24V SF12025B2L24-C (4 wires)
464,30 UAH × = 464,30 UAH
493,40 UAH
from 1 pc : — 464,30 UAH
from 10 pcs : — 429,50 UAH ( -7,5%)
from 52 pcs : — 394,60 UAH ( -15,0%)

Current balances: 104 pcs

Similar products


Specifications

Manufacturer Shenzhen SHENG FENG Electronics Co., Ltd., (Fancool)
Fan type Axial
Power supply type DC
Supply voltage range 18 - 26.8 V
Nominal supply voltage 24 V
Nominal current 0.27 A
Width 120 mm
Height 120 mm
Thickness 25 mm
Bearing type Rolling bearing
Rotation speed 3100 rpm
Airflow, m³/h 175.2 m³/h
Airflow, CFM 103.12 CFM
Noise level 46.6 dB
Housing material Plastic
Impeller material Plastic

Product picture

Product description format_size zoom_out zoom_in

Connection:
1 - black wire - GND - negative supply.
2 - red wire - VCC - positive supply. Do not connect to PWM controllers without an output filter.
3 - yellow wire - FG - open-collector output. It carries a square wave whose frequency is proportional to the rotation speed. A pull-up resistor is required on the controller side. Maximum current 10mA, maximum voltage 30V. If the impeller stops (stalls), the output may be either high or low. If not used, leave it unconnected.
4 - blue (gray) wire - PWM - speed control input. Signal type - 25kHz PWM with a duty cycle from 0% to 100%. It has an internal pull-up resistor to a 5V supply. Source current about 1mA. Requires an open-collector output on the controller side. Do not connect this input to +VCC, as it may damage the fan. If not used, leave it unconnected; the fan then runs at full power. Depending on the model, at a low signal level the fan either stops (in which case the 0% - 20% range is not recommended due to unstable operation at low speed) or runs at minimum power (then 0% corresponds to minimum power and 100% to maximum).

Only registered users can leave feedback and ask questions

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Евгений ЗП unknown

Reduced prices: View more…