Single-channel stabilized switching power supply with precise adjustment of output voltage from 0 to 100 V and output current from 0 to 20 A. It features good voltage and current stabilization. Powerful and efficient, suitable for service and laboratory work.
Features:
- indication of current, voltage, resistance, and power on four 4-digit red LED displays
- smooth adjustment of voltage and current (a short press on the control switches between "coarse"/"fine" modes)
- in addition to the main power switch, there is an output on/off button
- short-circuit protection
- current limiting
- simultaneous display of voltage, current, resistance, and output power supplied to the load
- high voltage and current stabilization factor
- active cooling via an internal fan
Technical data:
-
Output voltage: 0 - 100 V
-
Output current: 0 - 20 A
-
Output power: up to 2000 W
-
Voltage accuracy: ≤ 0,2%
-
Current accuracy: ≤ 0.5%
-
Load accuracy: ≤ 0.5%
-
Ripple level: current <1%, voltage <1%
-
Load regulation: current <0.5% + 20 mA, voltage <0.5% + 20 mV
-
Voltage setting step: 0.1 V
-
Current setting step: 0.1 A
-
Display of output current, voltage, and power — 4 pcs 4-digit LED displays
-
Power supply: ~220 V (50 Hz)
-
Operating conditions: +5 ~ +40 °C, relative humidity <80%
-
Device dimensions: 430 x 250 x 155 mm
-
Box dimensions: 520 x 320 x 250 mm
-
Weight: approx. 5 kg
Please note! The power supply requires an additional 16A power plug to be installed on the cable. Alternatively, it can be connected directly to a 220V junction box.
Also included are ring terminals for the output power cables. The output cables themselves are not included.