ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
Query history
your search history is empty
Whole catalog ↠ Development tools ↠ Modules ↠ Remote control modules
Product code:
053581

Controller DC motor 12V/24V, wireless

DC motor control controller, linear motor (actuator) 12/24 V
Controller DC motor 12V/24V, wireless
In stock
751,90 UAH × = 751,90 UAH
from 1 pc : — 751,90 UAH
from 5 pcs : — 714,30 UAH ( -5,0%)

Current balances: 9 pcs


Product picture

Product description format_size zoom_out zoom_in

  Controller for a brushed DC motor of the START-STOP-REVERSE type. Ideally suited for controlling linear actuators for opening gates, windows, and adjusting table height.
 

Main characteristics:

  • Power supply voltage: 12V (24V)
  • Load (motor) power: up to 100W - resistive,  up to 50W - inductive, recommended up to 50 W
  • Standby current consumption: 3--5mA
  • Receiver (transmitter) frequency: 433MHz
  • Receiver sensitivity: ≥ -105dBm
  • Operating temperature: -12..+80°C 
  • Receiver weight: 0.06 kg

Setup instructions

1. Select the power supply voltage 12V or 24V by switching the jumper on the board.
2. Connect the power supply and pair the remote control buttons with the controller. The controller is universal and can work with various remotes.

Remote pairing instructions

  • Press the button on the controller once briefly, then the LED on the board will light continuously. Press the button on the remote that you want to assign for motor start "Start". The LED will blink, indicating that the signal has been received.
  • Similarly, press twice briefly. Assigning the "Stop Start" button.
  • Press three times briefly. Assigning the "Reverse" button.
  • Press four times briefly. Assigning the "Stop Reverse" button.
  • Press five times briefly. Assigning the "Stop All" button.
 
 Buttons can be assigned in any order. Some buttons may be skipped. A long press clears previously assigned buttons.
 For linear motors, it is recommended to configure three buttons: "Start", "Stop All", "Reverse".
 
3. Set the controller operating mode using the ABC jumper.
  • Mode A. The motor runs while the corresponding button on the remote "Start" or "Reverse" is held. 
  • Mode B. The motor runs continuously after a short press of the "Start" or "Reverse" button. Stops after pressing "Stop All", "Stop Start", or "Stop Reverse". Standard mode for linear actuators.
  • Mode C. Power is applied to the motor briefly. Suitable for systems with a built-in rotation control controller.

Only registered users can leave feedback and ask questions

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Последние просмотренные товары Посмотреть Последние...