By domestic classification, corresponds to grade POSSu-15-2.
It is a tin-lead-antimony soft solder containing 83% lead (Pb), 15% tin (Sn) and 2% antimony (Sb).
The product is intended for professional use.
Melting temperature: melting begins (solidus) at about 184 °C, and full melting (liquidus) is reached at 275 °C.
Such a wide range means that the solder solidifies slowly and passes through a pasty state.
Soft antimony solder. Antimony in the composition increases joint strength.
Purpose: used in mechanical engineering, instrument making and for tinning parts where high electrical conductivity is not required and the low cost of the material with a lower content of expensive tin is critical.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown