З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
The power regulator is designed to connect an active load (soldering iron, incandescent lamp, etc.) to a 220V alternating current network.
The use of a power regulator will allow avoiding overheating of the soldering iron, thereby improving the quality of soldering, as well as extending the life of the soldering iron heater.
The TR8 regulator module is designed as an assembled board for installation in other devices and products.
The compact dimensions of the module simplify installation. Because the board is light, it does not require additional fastening, it is enough to fix the regulator potentiometer on the panel of the device being upgraded.
For overload protection, the module is equipped with a fuse (fuse).
Characteristics:
working voltage: 220V, 50Hz
maximum load power: 400W
regulation range: from 100% to 15% of full power
Dimensions:
board length: 41 mm
board width: 24 mm
total module height: 23 mm
ATTENTION! ALL ELEMENTS OF THE DEVICE ARE UNDER THE CAPACITY OF A 220 VOLT NETWORK.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Евгений Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
