Soldering station based on an infrared preheater for printed circuit boards, additionally equipped with a hot air dryer and a tripod for its installation.
Designed for mounting and dismounting of microcircuits in BGA, SOIC, CHIP, QFP, PLCC packages and similar planar components of small size.
Adjustable skids are provided for mounting the boards.
The maximum width of the board installed in the holder is 155mm. Heating zone size - 110mm * 110mm.
Axial bearings are pressed into the slide, which ensures smooth movement along the guides, without jamming.
Larger boards can be stacked simply over the rails.
The heating element of the heater is ceramic, one-piece.
Temperature controller with digital display and push-button control.
Supply voltage - 220V, 50Hz
Maximum power - 600W
The temperature adjustment range of the platform heating element is from+10°C to+350°C.
600 W hot air gun with built-in fan, maximum air flow rate of 120 liters per minute, temperature from 100°C to 480°C.
The set includes 4 crimp-type cylindrical nozzles of various diameters.
The function of automatic cooling of the hot air gun after inserting the hot air gun into the holder protects the heating element from overheating.
The power to the heater is cut off, while the fan continues to blow through the hairdryer, cooling it down to a temperature of +100°C.
Supply voltage: 220V ±5%
Maximum power consumption 1200 W (with bottom heater and hairdryer on).
All YIHUA soldering stations and board heaters have a 3 month warranty.
Heating elements and soldering iron tips are not covered by the warranty.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
