Drilling machine with a chuck for drilling printed circuit boards, wood, metal plastic.
Rotation speed is adjustable, maximum 16000 rpm.
Specifications:
power supply: 220 V, 50 Hz
power: 340 W
spindle stroke: 25 mm
post height: 300 mm
Distance from base to chuck (max): 150 mm
distance from the axis of the chuck to the machine stand: 112 mm
drill diameter: 0.5 - 6.5 mm
chuck type: jaw
Chuck mount: Morse taper B10
The speed depends on the placement of the belt on the pulley. The belt drive is located under the housing cover and has three belt positions on the pulleys, respectively 8-11-16 thousand rpm.
To change the gear ratio, you must remove the cover and reinstall the belt.
You can quickly change the rotation speed of the chuck with an electronic speed controller.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown