A zinc-rich paintwork designed to protect surfaces from corrosion and rust.
Forms a strong and flexible film that adheres firmly to metal.
The coating film is 99.5% zinc pigments and is electromechanically bonded to a clean metal surface. The coating provides active galvanic protection and prevents rust formation, even if the surface is damaged or scratched.
Fast drying, has excellent adhesion and forms a dense gray layer on the surface of the part.
The preparation complies with DIN50976, Mil. Specs. P-26915C, P-46105 and P-21035B.
Characteristics:
-
color: gray
-
density at 25°С: 0.95 g/cm³
-
drying time: after 30 min. dries to dryness, dries completely after 24 hours
-
heat resistance: 400-500°С
-
salt spray resistance (DIN53167): about 600-800 hours
-
recommended film thickness: 60-80 microns
-
zinc pigment purity: 99.5%
Purpose :
The coating is used to protect against corrosion of structural steel, steel roofs, windows and doors, to refurbish electroplated coatings, to treat welds and spot welded joints, used in households, for treating garden tools, air conditioners, cooling towers and agricultural equipment .
Recommended use:
Spray the product only on a clean and dry surface. Remove scale particles from the surface with a wire brush.
Remove dirt and grease with DEGREASER and CLEANER .
Shake the can well before use! During storage, the pigment settles, it must be mixed with vigorous shaking.
Spray the preparation over the entire surface of the part from a distance of about 30 cm so that the layer formed on the surface spreads.
The treated surface dries in 30 minutes before peeling off, complete drying is achieved in 24 hours.
The aerosol spray is self-cleaning. If it gets clogged, clean it with a solvent.