URETHANE CLEAR is a high-quality one-component polyurethane varnish designed to protect and electrically insulate printed circuit boards, electric motors, transformers, electronic equipment and components. It forms a protective layer that resists mold, corrosive vapors, thermal and mechanical stress and moisture. It forms a strong, reliable, flexible non-conductive film with excellent adhesion.
Color: clear
Density: 0.79 g/cm³
Drying time at room temperature: tack-free after 25 min., fully dry after 48 hours
Heat resistance: -40°C - +120°C
Viscosity 12 s (DIN 53211)
Resistant to: acids, alkalis, moisture, salt spray, alcohols, fungi, thermal and mechanical stress, chlorinated solvents
Surface resistance 2.5×1012Ω
Volume resistivity 5.1×1014Ω
Dielectric strength 82.9 kV/mm
Dielectric constant: 2.21
Application
Protection of printed circuit boards, components, wires, cables, etc. Elimination and prevention of current leakage, corona discharges, short circuits and charge leakage. Corrosion protection of components exposed to adverse atmospheric conditions.
Instructions
The surface to be protected must be cleaned of dirt, grease, etc. DEGREASER aerosol is ideal for this. Shake the can before use. Spray from a distance of about 30 cm. If necessary, apply a second coat after 24 hours. The coating becomes tack-free in about 20 minutes. After use, turn the can upside down and press the nozzle several times. Rinse a clogged nozzle with acetone.