ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

Шановні клієнти інтернет-магазину!

  У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком:
• з 31.12.24(Вт) по 02.01.25(Чт) не працюємо
• з 03.01.25(Пт) працюємо в звичайному режимі.

  Інтерет-магазин приймає замовлення цілодобово 24/7 !



Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Archive
Код товара:
024411

Meter C and ESR+TPI/TDKS CapEsrFbt v2.2 in-circuit NEW

A device for testing electrolytic capacitors without evaporating them from the board, as well as for detecting short-circuited turns in pulse transformers, coils, etc.
 Meter C and ESR+TPI/TDKS  CapEsrFbt v2.2 in-circuit NEW

Deliveries terminated.



Technical documentation

Изображение товара

Product description format_size zoom_out zoom_in

The measuring part of the device follows the ESRmicro 4.0 circuitry. This model uses a Microchip PIC18F45K20 microcontroller, a display from a NOKIA 1202 mobile phone is used as an indicator. The scale of the device is divided into three ranges with automatic selection of the measurement range.
Measurement currents for ranges 0.3mA, 3mA, 30mA.
Fast measurement of capacitance and ESR of capacitors. The measurement time is only 0.5 sec, and does not depend on the capacity value. To carry out measurements, it is necessary to de-energize and discharge the capacitors on the board under study.
Measuring C and ESR
  • capacitance of capacitors 0.03-60000μF
  • ESR resistance 0.02-100om
  • measurement time of capacitance and ESR only 0.5 sec
  • 96x68 graphic display Nokia 1202
  • voltage across the investigated capacitance 0.2 volt
  • large display characters - 24pixel
  • battery voltage indication
  • automatic backlight
  • automatic (50sec interval) and manual shutdown
  • forced calibration (0, 1, 10, 100om)
  • power supply: AAA batteries, 4 pcs.
Checking TPI/TDKS for short circuits
The presence of short-circuited turns in a pulse transformer leads to heating of the transformer and the key transistor. Now, to check the pulse transformer, it is enough to touch the winding probes and get the result. The device even detects the presence of one closed loop.

Предлагаемые замены

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…