Monostable foot pedal with changeover contacts (DPDT) 15 A 250 VAC, made as limit switches.
All-metal housing with mounting holes.
External three-core cables 10cm long.
The pedal controls the motor in modesStart-Stop-Reverse . It can control both a three-phase motor and a brushed DC motor.
Operating principle:
The pedal has two three-core cables: one for the motor and one for the power supply. The order does not matter.
Three-phase motor wiring diagram:
In the middle position (nothing pressed) the motor is in Stop. The yellow and blue wires are open. The brown wire is always closed.
In position forward(pedal pressed toward the cables) the motor is in Start. The yellow and blue wires are connected color to color.
In position reverse(pedal pressed away from the cables) the motor is in Reverse. The yellow and blue wires are cross-connected.
To control the direction of a brushed DC motor, use only the yellow and blue wires.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown