Used for electrical insulation and improved heat transfer between heat-generating elements of electronic circuits (semiconductors, thermal fuses, etc.) and a heat sink.
Plastic; after pressing it gradually fills all micro-irregularities, providing good thermal conductivity.
It is a dielectric. No additional measures are required for electrically insulating the component from the heat sink, there is no need to install a mica pad, etc.; no thermal paste is required during installation.
inner diameter: 9 mm
outer diameter: 10 mm
wall thickness: 0.5 mm
length: 1 m
Technical specifications:
color: gray
thermal conductivity, min.: 1.2 W/(m·K)
operating temperature range: from -50°C to +260 °C
density: 1.8±0.2 g/cm³
hardness: (Shore): 70±5
tensile strength: 8±2 kg*f/cm²
dielectric strength: > 10 kV/mm
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown