The device uses a resistive temperature sensor. The sensor wire is non-detachable and soldered to the board. Wire length 1 meter.
The temperature sensor is sealed in a nickel-plated metal cup
Sensor dimensions: diameter 4 mm, length 20 mm.
The thermometer case is designed for panel mounting, with latches on the side faces.
Temperature is shown on an LCD display without backlight.
Character height 15 mm.
There is no power switch; the thermometer starts working immediately after the batteries are installed.
Feature of this model: the battery compartment cover is located on the front of the device. Unlike most similar panel thermometer designs, replacing the battery does not require removing the entire device or reaching the back of the case, where the battery is usually located.
Technical specifications:
thermal sensor dimensions: length 20 mm, ∅4 mm;
sensor wire length: 1 meter
LCD display: 3.5 digits, character height 15 mm
measurement range: -50°C ... 110°C
resolution: 0.1°
accuracy: ±1°C
display update rate: 1 time per 10 seconds
power supply: 1.5 V (1 pc LR44 battery)
meter dimensions:
front panel 62.6 x 29.5 mm
depth: 20 mm
panel cutout: 58 x 25.6 mm
mounting method: snap-in latches on the sides of the case
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown