INTERTOOL FS-6940 tar remover is a solvent-based aerosol for quick and effective removal of bitumen, tar, resin, underbody coating and rubber marks. It also removes oil, paint, grease, asphalt chips, old polish and insect and bird marks.
Thanks to pressurized delivery and a special formula, the cleaner easily penetrates pores and hard-to-reach places and removes dirt that ordinary washing cannot.
Safe for all paintwork and for chrome, rubber and plastic surfaces. Does not dull gloss finishes. Used to clean car bodies, glass, wheels, bumpers, headlights, grilles and chrome trim. Cleans without damaging vinyl and other protective films.
Get INTERTOOL tar remover and safely remove bitumen, tar, resin, insect and bird marks and other stubborn dirt!
Application
The cleaner works best at can and ambient temperatures of +10°C to +25°C.
1. Spray the cleaner onto the dirty surface from 15-20 cm.
2. Wait 3 to 5 minutes.
3. Wipe the treated area with a sponge or cloth to remove residue.
4. Repeat if necessary.
5. Rinse the surface with water to remove all residue and cleaner.
Important! Do not leave the cleaner on the surface for more than 30 minutes.
Precautions:
Protect from direct sunlight and do not heat above +50°C. Do not spray near open flames or hot surfaces. Do not smoke while using. Use in well-ventilated areas. Avoid contact with airways, eyes, mouth and damaged skin. Do not open or burn the can after use. Store at -5°C to +35°C out of reach of children.
Pressurized container! Flammable!