INTERTOOL FS-4120 «Liquid Wrench» penetrating lubricant with rust converter and MoS2 quickly frees rusted, seized or frozen threaded and cylindrical joints without damage. It makes assembly and disassembly easier by freeing rusted bolts, nuts, screws, etc. It cleans and lubricates cables, chains, bearings, rollers, firearm parts, door hinges, car locks, mortise and padlocks, etc. It cleans, lubricates and protects electrical contacts from oxidation.
Contains molybdenum disulfide (MoS2), which aids deeper penetration, forms an even film, protects joints and surfaces from moisture and corrosion, and works at extremely low and high temperatures.
For outdoor and indoor use.
• Dissolves and displaces rust, scale and dried-on dirt from within.
• Penetrates the hardest-to-reach places.
• Lubricates, reduces friction and extends the life of joints and mechanisms.
• Prevents freezing and frees frozen joints.
• Forms a protective layer.
• Keeps out moisture and prevents rust.
• Preserves surfaces and joints.
Use:
1. Mix the contents by shaking the can for at least 2-3 minutes.
2. Apply to the area from 10-15 cm with or without the applicator.
3. Maximum effect is guaranteed with close contact between surface and lubricant for 2-3 minutes.
4. For heavily rusted, long-oxidized and seized joints, fasteners or assemblies, apply twice with a 3-5 minute interval before disassembly.
Important! Do not use excessive force when loosening. After applying, work the joint back and forth in different directions, then loosen.
Precautions:
Protect from direct sunlight and do not heat above +50°C. Do not spray near open flames or hot surfaces. Do not smoke while using. Use in well-ventilated areas. Avoid contact with airways, eyes, mouth and damaged skin. Do not open or burn the can after use. Store at -5°C to +35°C out of reach of children.
Pressurized container! Flammable!