Base - stainless steel plate.
Unpainted, withstands high temperature, which is important for hot air or infrared soldering.
The fixture is quite massive, weight 250 grams; no additional fastening to the table is required.
Clamp guides are made of solid square metal bar.
On the longitudinal guide, the stop is spring-loaded and fitted with a locking screw.
The stops have slots for holding the board. Slot width 1.2 mm, but the slots can easily be enlarged if necessary. The stops are made of aluminum.
The base surface has stamped recesses for working with BGA chips:
7.6 x 9.9 mm
14.3x13.4 mm
14.4x14.8 mm
14.5x15.7 mm
14.0x14.8 mm
14.7x11.8 mm
11.9x17.0 mm
9.1x9.0 mm
Specifications:
base size: 130 x 90 mm
base material: stainless steel
base thickness: 2 mm
minimum board width: 50 mm (along the longitudinal guide)
maximum board width: 80 mm (along the longitudinal guide)
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown