Panel DC voltmeter module 0...100 V with 0.28" display, green digits.
The module uses 3 wires. It has a built-in regulator for the controller supply. It needs a 4.5-30 V supply separate from the measured circuit to measure 0-100 V. Or it can be powered from the measured voltage, then the measuring range is 4.5-30 V.
Connection:
Black wire - common (supply and measurement negative)
Red wire - supply positive
Yellow wire - measured voltage
Main specifications:
Voltage measurement range: 0-100V DC
Voltage accuracy: ±1%+1 digit
Supply voltage: 4.5...30V DC
Current consumption: <23mA
Refresh rate: ≈300ms
Display: three-digit 0.28" LED
Color display: green
Dimensions: 30x10x8mm
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown