Soldering iron heater 905E/907H with thermocouple [ceramic, 60W, 220V]
Spare heater for soldering iron YH-908-60 and similar 905/908 series soldering irons from other manufacturers. 220 V, 60 W, ∅5.5 mm. Built-in temperature sensor.
Ceramic heating element for 220-volt 905/908 type soldering irons of all manufacturers, with built-in thermocouple (soldering irons with temperature controllers).
Structurally, the heater is a coil of thin nichrome wire wound on a ceramic rod and placed in a ceramic sheath tube. The front end of the tube is closed with a plug, also made of ceramic.
Suitable for many similar soldering irons from different manufacturers (e.g. CT-96, GH-2016B).
Specifications:
supply voltage: 220V
maximum power: 60W
length: 76 mm
diameter: 5.5 mm
thermocouple resistance: ~2 Ohm
heater resistance: 800 ~ 900 Ohm
When replacing the heater, pay attention to the polarity of the thermocouple connection.
Lead color coding: heating element wires are the same color, thermocouple wires are different colors.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown