Ausbond A529 conductive epoxy adhesive uses fine copper powder as a conductor. This adhesive has a high bond strength.
Features:
Color is gold
Density: 2.52 g/cm³
Volume resistivity: 10-3 – 10-4Ohm * m
Tensile strength: 11.8 MPa
Shear strength: 8.2 MPa
Working temperature range: -60°C ~+120°C
Application procedure:
Surfaces must be cleaned and sanded before glue is applied.
The surfaces to be bonded must be clean and dry.
Squeeze the required amount of components A and B into a container from the syringes in a 1: 1 ratio.
Mix thoroughly until smooth and color.
Apply to bonding surfaces and press firmly.
Curing occurs in 1-2 hours.
Full bonding after 24 hours.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown