The SV1 controller is an electronic device for vacuum distillation (distillation), the "brain" of a mini-laboratory.
SV1 facilitates the distillation process, and the person only monitors its processes. The controller shows on the screen and changes many parameters of distillation: temperature, pressure, time. The controller can control a special vacuum pump that evacuates air from the tank and reduces the pressure in the tank.
In SV1, you can configure 4 programs for your favorite recipes (for example, for different types of raw materials) and carry out the distillation in automatic mode, slightly adjusting the parameters in the process.
Specifications:
• distillation cube, suitable volume: 25-100 l;
• maximum vacuum value: 90 kPa;
• power section of the controller: BTA41-600B triac;
• support of currents: up to 40 Amperes (220 V);
• microcircuit with tracking the passage of alternating current through zero. Removes interference in the network, so the heating of the mash in the cube is smooth, there are no temperature fluctuations.
This controller has the ability to record 4 heating programs for 100 hours of duration each+two modes
manual operation, including the mode "first we heat at 100% power, upon reaching the temperature, we switch to% of the power set by the operator".
It has a built-in 12V power supply, two-line LCD, BTA41 triac for precise load control, separate control of a powerful 12-24V DC motor.
Allows you to control the heating process and maintain the temperature, for example, steam generation or distillation (including laboratory and alcohol) throughout the process - initial heating, reaching
the main mode of maintaining the temperature with PID regulation, the end of the main work.
The controller can control the temperature of distillation (including alcohol) under vacuum (pressure below atmospheric) and complete
it at a given temperature. Remote temperature sensors are used for monitoring.
This version of the Controller is designed to facilitate the heating and (or) distillation processes by an untrained operator, and to provide an opportunity for the operator
receive accurate data on temperatures and pressure, for possible subsequent change and adjustment of modes specifically for a specific process.
For a detailed description of the operating modes and recommendations for configuring the controller, see the attached instruction file.
The controller is sold as a fully assembled and tested main board and indicator board on a ribbon cable, without a case. For operation, it is necessary to place the boards in the case.
Dimensions of the main board: 170 x 92 mm, height 40 mm (at the top of the radiators).
Indicator board dimensions: 80 x 37 mm, thickness 10 mm.
Recommended enclosures:
Completeness of delivery:
-
controller board assembly, without case - 1 pc
-
LCD indicator with a loop - 1 pc
-
threaded temperature sensor - 1 pc
-
threadless temperature sensor - 1 pc
Инструкция вакуумный дистиллятор
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
