Features of this charger model: The SOROKA v.8-PLus charger is "Three chargers in one" !
When developing the SOROKA v.8-PLus charger, use was made of
many years of real-world experience operating SOROKA v.6 and SOROKA v.7-Profi.
Some models of SOROKA v.7-Profi have to date logged over
11000 hours of real operation without failures or breakdowns.
Changes have been made to the charger's operating program, based on many years of
of real use of the pulse charging algorithms of the SOROKA v.6 charger and the charger
SOROKA v.7-Profi, which were made possible by the 16-bit
microcontroller Texas Instruments MSP430FR5972, featuring 12-bit ADCs
with a speed of 200 thousand samples per second. This made it possible to increase
to a new level the capabilities of the charger Version8 for tracking parameters
battery during charging, and the unique FRAM memory technology made it possible to
store more dynamic data.
We have worked a lot on technologies for using distributed
power modules that deliver high currents and do not require
creating single large converters, with all their problems.
This charger model uses two power modules, each of which
delivers up to 16 volts and up to 15 Amps of current. Each module is autonomous, has
transformer output galvanically isolated from the primary side. Each
the module has an "onboard" current monitoring (measurement) IC based on the effect
Hall effect, with very low on-state resistance (1.5 milliOhm), and
a separate discharge circuit for running a test-and-training
cycle with the battery, separate control, and its own P-type power transistor
for switching the load and a power rectifier. As
power converter of the module, this charger model uses TOP250.
Charging currents "per channel" up to 15A for each channel.
The SOROKA v.8-Plus charger was made "tandem" (dual-channel) for a reason.
As experience of using the charger shows, Customers not only
engage in charging and restoring their own batteries, but also
help (provide assistance or "as a service") other people with charging
their batteries. This raises a problem: the principle "one charger -- one battery"
takes a lot of time to work with each battery, and with the use of
different modes and different currents.
The SOROKA v.8-Plus charger allows Users to use three types of battery connection:
1) Charging one battery: 6V, 8V, 12V, *Hv (user-defined voltage).
2) Charging two different batteries, 6V, 8V, 12V, *Hv, via two independent channels, with different charging modes.
3) Charging one 6V, 8V, 12V, *Hv battery with double current, i.e. two modules work in parallel, for currents up to 30 Amps.
This significantly expands the range of applications of the SOROKA v.8-Plus charger, both for
personal and also for industrial (service centers working with
many batteries). It is now possible to buy a charger "to grow into", without spending
a lot of money at once, i.e. buy a charger with one power module (SOROKA v.8-Basic charger),
for 15 A of current, and then, if necessary, buy and insert (solder in)
a second module, and gain additional capabilities.
Advantages of using the SOROKA v.8-Plus charger:
-
reduced storage battery operating costs
-
storage battery service life extended 2-3 times
-
recovery of sulfated storage batteries
-
prevention of premature battery aging
-
increased automation of battery charging processes
-
increased capacity and maximum output current of the storage battery
Charger features:
-
charging of deeply discharged batteries with intermittent current
-
«accelerated automatic adaptive charging» ("STD" and"AUTO" modes)
-
adaptive charging with capacity top-up to 100-105%
-
automatic desulfation (performed in all modes)
-
automatic charge-discharge cycling (requires a discharge load to be installed by the user)
restoring the capacity of batteries, as well as the theoretical foundations
design of lead-acid batteries. Described in detail are
various modifications of batteries (gel, AGM) and the necessary requirements for
operation of various types of lead-acid batteries.
The description and operating instructions for this SOROKA v.8-Plus charger are also posted there
Due to possible hardware and software modifications of the device and
making appropriate changes , the Operating Instructions are not
is given here, on the current page.