"Cold weld" - the name for a fast-curing composite polymer adhesive.
A cylindrical two-layer bar, WHITE in color. Packed in a plastic flask.
ABRO AS-224W super putty reinforced with steel powder is used for fast and reliable joining and repair of parts made of non-ferrous metals and alloys. Bonds ferrous metals, plastic, ceramics, wood perfectly
Operating temperature range from -60°C to +204°C. Provides reliable repair in high-humidity conditions and at low temperatures (down to -10°C), provided the mixture is mixed in a warm room.
The main difference from liquid two-component adhesive is primarily ease of use, especially in the field (e.g., car repair on the road). It is much more convenient to simply knead a small piece of “cold weld” in your hands, and the compound is ready to use (mixing the components of a liquid adhesive is somewhat more complicated).
The second advantage - the compound has a consistency close to plasticine, it holds on vertical and overhead surfaces and does not run, unlike liquid adhesive. This “fast steel” can easily be formed into a part of the required shape, or used to build up a reinforced seam when bonding. The seam can additionally be reinforced with metal or polymer mesh.
After full curing, the composite is easy to sand and paint.
Advantages
ABRO AS-224W black cold weld adhesive bonds much stronger than epoxy resin.
Easily mixed by hand. Even under water, it has excellent adhesion to all materials and to oily surfaces.
ABRO AS-224 stops leaks permanently! Not dissolved by automotive fluids.
Sets in 5 minutes, polymerizes in 15 minutes, fully cures in 1 hour.
Can be painted, drilled, tapped, machined, filed and sanded.
Specifications
-
color: white
-
density: 1.9 g/cm³
-
maximum operating temperature + 260°C
Usage guidelines
To activate the mixture, cut off a piece of the required volume and knead it well in your hands so that the components are thoroughly mixed.
It is recommended to wear rubber gloves or slightly wet your fingers with water so that the adhesive sticks less to your hands.
For the final shaping of the seam it is also better to use wet fingers.
When repairing under water or on an oily surface, press the compound until you feel it adhere to the surface and the leak stops, holding it for 5-10 minutes until it cures
Setting time is 5-10 minutes.
Strength build-up time 1-1.5 hours depending on temperature.
Weight 57 grams.