ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
Query history
your search history is empty
Whole catalog ↠ Tools and equipment ↠ Soldering equipment, soldering irons ↠ Soldering stations and desoldering equipment ↠ Soldering stations assembly
Product code:
044677

Soldering station T12-958, OLED-1.3", 75 W, T12 tip

Compact soldering station with a color graphic display, cartridge tip-heater, power 75 W. Fast heat-up, highly stable temperature control.
Soldering station T12-958, OLED-1.3
Manufacturer: QUECOO
NOT available.
Expected price: 3 524,00 UAH
from 1 pc : — 3 524,00 UAH
from 5 pcs : — 3 348,00 UAH ( -5,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Product picture

Product description format_size zoom_out zoom_in

Specifications:
  • Soldering iron power 75W
  • Heats up to 300°C in 20 seconds
  • Fine-tuning of the controller
  • "Sleep" and "wake" modes: automatic and manual
  • Heating rate setting
  • Temperature step adjustable down to 1°C
  • Remembers the set mode
  • Aluminum housing
  • Small housing 120 x 88 x 38 mm
  • Built-in OLED screen
  • Microcontroller series STM32F

Soldering stations with replaceable T12 cartridges (tips) handle high-heat-capacity work very well. The thermocouple is built into the heater with no gap between heater and tip metal. This gives an instant response to tip temperature drops and adds the power needed to hold the set temperature.

Soldering station contents:
1. Control and power unit 
2. Extended iron handle for removable T12 tips
3. Replaceable T12-K cartridge (knife tip)
4. Mains power cable
5. Soldering iron stand.

Getting started:
1. Insert the cartridge (tip) into the iron and lock it
2. Connect the soldering iron cable to the control and power unit
3. Place the iron in the stand
4. Connect the power cord to the socket on the back of the power and control unit
5. Flip the power switch on the back of the power and control unit

To enter the settings menu, press and hold the encoder (temperature knob) on the front of the station's power and control unit for a few seconds.
 

Soldering station settings menu

To enter the soldering station menu, press the control knob on the front panel of the soldering station, after which a menu list of 21 items is displayed:

  1. Standby or standby mode. Here you set the tip temperature in standby mode, the time in minutes after which the station enters standby when idle, and the operating mode of the wake-up sensor. You can choose from 4 modes — Shake (vibration), Switch (switch), Manual (manual), Auto (automatic).
  2. Sleep or sleep mode. Here you set the idle time in minutes after which the station goes to sleep.
  3. Boost or boost. Here you set the value by which the tip temperature is temporarily raised and the boost duration in minutes.
  4. Cold end. This menu item handles temperature correction depending on ambient temperature; here you can select the thermistor type (NTC, PTC) and set the reference point (24 degrees Celsius by default).
  5. Tip or tip library. Here you can select the tips you have available; later, the tip switching menu will offer a choice among those marked in the library. The list is extensive, about 80 items, plus user cells if a specific tip type is not in the library.
  6. Stepping or temperature change step. Here you set the step in degrees Celsius by which the temperature changes when increased or decreased in operating mode.
  7. Password or password protection. Here you set a password for accessing the settings menu and enable its use.
  8. Screen Saver or screen saver. Here you configure the screen saver activation and the idle time after which the screen saver is activated.
  9. Buzzer or buzzer. Here you can enable or disable the buzzer that signals various actions, e.g. it indicates reaching operating temperature, warns of low voltage, etc.
  10. Voltage or voltage. Here you enable or disable on-screen display of the current value of the voltage supplied to the tip.
  11. LowVol Protect or low voltage protection. Here you can enable protection and alarm for insufficient supply voltage. Thresholds for the warning signal and station shutdown are set separately.
  12. Power On – station power-on mode. Here you set the operating mode when the station is turned on: choice between operating mode, standby mode and sleep mode.
  13. Desolder or desoldering mode
    In this menu item, select:
    — Valve — valve
    — Inching — jog
  14. Pump setup. Pump run time setting. This menu item sets the pump run time (10÷60 seconds).
  15. Language — language selection menu. The system language is selected here, Chinese or English.
  16. DateTime — date and time setting
  17. RTC Adj — clock accuracy adjustment. This item sets:
    — Day Error — correction factor for adjusting clock accuracy (-60÷+60 seconds)
  18. RTC Init — reset date and time settings.
  19. Sys Info or system information. The software version and controller board revision are displayed here.
  20. Init or initialization. Resets all station settings to factory defaults.
  21. Exit or exit. You can select this item and return to operating mode, or simply long-press the encoder knob; the effect is the same.

T12 tips contain a thermocouple connected in series with the heater, which is used to measure the temperature. Thanks to the monolithic tip design, temperature stability is very high.

Calibration

— Adjust Point[450℃] — setting the 450℃ temperature point, on the screen below:
— Cur Tmp [450℃] — temperature shown on the display
— Real Tmp [***℃] — actual tip temperature.


Measure the actual tip temperature by any available method and, turning the encoder knob, set the Real Tmp [***℃] parameter according to the thermometer reading. Press the encoder knob; the screen image changes to
— Adjust Point[350℃] — setting the 350℃ temperature point.
Calibrate at this temperature as well. Press the encoder knob; the screen changes again, now on
— Adjust Point[250℃] — setting the 250℃ temperature point.
Calibrate at this temperature as well. Press the encoder knob; the station switches to operating mode. Tip calibration is complete.

Control

The station is controlled with the encoder knob. The control combinations are as follows:
1) Rotating the encoder knob
2) Short press on the encoder knob
3) Long press on the encoder knob (about 2 seconds)
4) Pressing the encoder knob while rotating it.
Rotating the encoder knob, depending on the operating mode or menu item, changes the operating mode or values, or moves through menu items. A short press on the knob is equivalent to select or confirm. A long press on the knob has two functions: if pressed in one of the operating modes, it opens the station settings menu; if pressed in the settings menu, it is equivalent to exit or cancel.
Pressing the encoder knob while turning it has two actions depending on the encoder's direction of rotation; turning the knob counterclockwise takes the user to the tip selection menu.

If rotated clockwise, the user enters the settings menu of the previously selected tip. Tip calibration and initialization are performed here.

Only registered users can leave feedback and ask questions

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: View more…

Последние просмотренные товары Посмотреть Последние...